15+ Years Experience a dedicated Senior Instrument Commissioning Technician within the Petrochemical and Oil and Gas industry, experience in the Oil and Gas fields Oil and Gas refineries and plants. International experience covers West Africa Offshore Angola (FPSO PSVM), Offshore Nigeria (FPSO Mystras and Jamestown), Offshore Angola (Takula platform), Offshore Cameroon (FSO KK1) and Gabon (Awoun project) as well as Offshore South Africa (FPSO Blue Waters (Glass Dower) and FA platform), Also Dubai dry docks (FPSO Mystras) and recently the Shipyard in Singapore. Currently onboard FPSO Kaombo Norte offshore Angola. Experience in Production and Maintenance on FPSO’s, Electronic Maintenance Program(CMMS) Maximo, Permit to work(ISSOW), Tool box talks, Risk assessments, Work orders, Routine Inspections, troubleshooting, repairs § Commissioning and Start-ups, Construction, Hazloc and Compex trained, Root Cause Analysis (RCA), Flow, Pressure, Temperature
and level calibration, Gas Testing/Hazard Assessment, (HITRA) and maintenance § P&ID Reading, Single line drawings. Trip & Alarm Checks, Cause & Effect Drawings, Risk Management / Assessment, Small bore tubing, Developing and Training of Nationals.
Day Rate $300.00 USD
The Average Day Rate for this Senior Instrument Commissioning Technician is $300.00 USD per Day. A Standard Contract Working Day is classed as 10 Hours with 1 unpaid Hour for Lunch. Additional allowance is Payable depending on location, which covers, Accommodation, Transport to and from the work site and Daily Allowance for Food, Beverage and Laundry. To estimate your daily team costs select the add this expert to your team. On Completion go to My Completion Team and Complete the Short Enquiry Form and we will do the rest…
Senior Instrument Commissioning Technician
SAIPEM – FPSO KAOMBO NORTE – SEMBAWANG SHIPYARD – The FPSO was birthed in Singapore Sembawang shipyard for the conversion phase in preparation for Offshore Angola for the production and maintenance phase(Permit to work, Troubleshoots, repairs and inspections according to Isolation standards and Risk assessment standards) Compile Fire and Gas excel spreadsheets for accessibility and maintenance purposes. Check and become familiarized with new equipment and installations for operational and maintenance purposes. Study the operational procedures and follow international standards and regulations on installations and inspections. Witness loop checks and OTP’s. Tri party (RFC’s) walk downs with the client. (Line walks). Do punching and follow up on unsatisfactory, incomplete installations. Check hook up drawings, data sheets, P&ID’s, check segregation of different metals for the prevention of galvanic corrosion. Do inspections on the Fire and Gas, Cargo tank loading instruments, Turret, Topside instrument, Engine room, Pump room etc. Assist Construction, pre-commissioning, Inspections. Doing recommendations on hookup drawings and general arrangements of instruments. Function checks on GTG’s. Consult with Vendor on new equipment. Capturing daily activities and attend meetings. Commissioning of the Fire and Gas system (Smoke, Gas, Flame and beam detectors)
WOOD GROUP – FPSO PSVM – BLK 31 – Instrument Technician – I was an integral member of the maintenance team on PSVM BLK 31 Angola delivering a wide variety of services. Completed a range of mandatory computer base training courses (CBT’s). This included HITRA (Hazardous identification task risk assessments). Also worked at heights, slips, trips and falls. Manual handling awareness, Environmental Awareness, Personal safety and security and lifting operations awareness. Authorised gas testing, Confined space entry and COSHH awareness. Systems included Yokogawa FF control system as well as Siemens system integrated. Performed daily updates on CMMS. E-logbook handovers at the end of each shift and crew changes. Performed inspections, troubleshoots and routine repairs and maintenance on a regular basis. Attended to all call outs. Performed the role of performing authority, isolating authority in the frame work of the integrated safe system of work – Permit to work (ISSOW). Agree work schedule and priorities with the Wood Group Kianda Supervisor and planner. Worked in close relationship with the Supervisor. Appointed as the control valve specialist on the major valves (Overhauls and repairs). Identified all actual and potential hazards and instituted mitigation actions as a part of the HITRA (Hazardous Identification and Task Risk Assessments). Successfully utilised innovative solutions to repair faulty equipment safely and effectively according to all safety standards. Health checks performed on rotating equipment such as compressors and turbines. Manage platform based critical spares, ensuring the correct spares holding and adequate storage. Successfully troubleshoots the Instrument air compressor system, repairs, and commissioned. Undertake system modifications as per approved work packs and authorised e-MOC. Weekly functional test perform of the emergency generators. Actively involved in the leek and seep (LANDS) tests. Trained, supported and developed Angolan nationals as well as peers across the multi disciplined operations. Complied with Wood Group Kianda and BP’s HSE and Quality policies and procedures. Participated in safety briefings and toolbox talks.
Senior Instrument Technician
AVENG GRINAKER LTA – MINING & MINERALS – Senior Instrument Technician – Oversaw, led and directed a team of 60 construction staff spanning various disciplines. Conducted daily safety talks and resource planning. Actively involved in the decision making process for equipment used. Construction of a new Manganese Plant in Kalagadi Working with client in designing office. Organised, analysed and issued P&ID and I/O allocation drawings in order to increase productivity. Saved time by directly contributing to the PLC and DCS drawing. Completed 60% of I/O allocations and the warning systems of the conveyor belt including hard-wired starting and stopping. Verify and issue loop termination drawings. Junction box installation, verification and re-positioning of positions for ease of maintenance. Support Construction Company in the providing of information relating to hook ups, take off points, installation of instruments and network topology. Point to point checks, Commissioning and start ups, Control system – Siemens S7, Do MOC’s.
Lead E&I Technciain
FLUOR ISL – KK1 FSO – OFFSHORE CAMEROON – Lead E&I Technician – Executed top-notch maintenance on the KK1 FSO. Reported to the Supervisor. Managed inventory by monitoring spare parts and completing orders. Ensured compliance with all safety protocols by conducting trip and alarm checks as well as fire and gas testing regularly. Maintenance on the KK1 FSO vessel. Daily updates on CMMS. Weekly verification of custody transfer equipment. Training of Cameroon Nationals (E&I Trainee Technicians.) Share experience. Attend to break downs on a daily basis.
Instrument & Measurement Technician
TAP – OFFSHORE ANGOLA – Instrument & Measurement Technician – Brought on to establish a plan to allocate the measurements from the unmanned remote jackets. Maintained the water injection wells and gas lift wells. Conducted oil sampling in the lab and recorded the findings from all jackets. Installed, programmed and maintained the Red–Eye water cut samplers. Allocation measurements. Maintenance on well heads, water injection meters Maintenance on gas injection (gas lift), turbine meters Maintenance on chard recorders, flow meters, Daniel orifice. Service and upgrade installations. Mcrtu’s, water cut meters (red eye), flare gas meters (panametrics).
Electrical & Instrument Technician
ALLIANCE MARINE – FPSO JAMES TOWN – Electrical & Instrument Technician – Maintenance, daily routine repairs and checks of instrumentation. Weekly Fire and Gas checks. Regular checks on the deluge system. Maintenance of fixed gas detection systems as well as portable, MSA and Draeger units.
Instrument Commissioning Technician
SAIPEM – FPSO MYSTRAS – Instrument Commissioning Technician – Joined the construction team in Dubai dry docks. Sailed to offshore Nigeria for hookup, commissioning and startup to first oil. Start maintenance program. Fire and gas regular checks. Fiscal off load checks and crude oil level checks as well as draught measurements. Monitor all systems to function in a safe manner.
BLUE WATER – FPSO GLASS DOWER – E&I Technician – Construction of the FPSO in Cape Town dry docks. Sailed to offshore South Africa for hookup, commissioning and startup to first oil. Loop checks, Calibration, Problem solving.