Senior Instrument Commissioning Technician

  • 20+ Years Oil & Gas Experience
  • Electrical Engineering
  • I&C Engineering
  • English, Filipino Speaking

 

Product Enquiry

Extended Profile

15+ years of experience in the oil industry, Senior Instrument Commissioning Technician, Knowledge of Instrumentation & Controls, electro-pneumatic, electrical controls etc . More than Ten years experience in construction, testing & commissioning, start-up, operation & maintenance for E & I / ICSS / FGS in Pharmaceutical Plants, Petrochemical plants ,FPSO, FLNG, FRSU, Production Platforms in Oil & Gas firm which includes onshore and offshore projects. Equipped with highly systematic and excellent analytical & planning skills. To utilize and apply my knowledge and intensive experience, at the same time make significant contribution for the benefit of the company.

 

 

 

 

Day Rate $300.00

The Average Day Rate payable for this Senior Instrument Commissioning Technician is $300.00 USD per Day. A Standard Contract Working Day is classed as 10 Hours with 1 unpaid Hour for Lunch. Additional allowance is Payable depending on location to cover Accommodation, Transport to and from the work site and Daily Allowance for Food, Beverage and Laundry. To estimate your daily team costs select add this expert to your team. On Completion go to My Completion Team and Complete the Short Inquiry Form and we will do the rest…

Senior E&I Commissioning Technician

Senior E&I Commissioning Technician – FLNG Hilli Episeyo – Golar LNG Limited – Was assigned in commissioning in team to carry out cold loop checking, commissioning and start-up. Perform field work for hot loop checking, troubleshooting and calibration of various instrument using the latest and standard test equipments. Simulate loops, logic testing as per system drawings. Was assigned as DCS Boardman / operator to verify, monitor and check all output results on temperature, pressure, level , flow transmitter reading from where comparison took place by tallying them from field to DCS / CCR . Perform cause & effect, sequence testing of PSD & ESD (emergency shutdown) which includes all E&I wiring interlocks. Pre-com / commissioning of actuated control valves, on/off valves, shutdown valves , BDV, MOV’s and switches etc. Liaise with package vendors to ensure all serial communication configurations, points, addresses, alarms, and ranges captured back in PCS Operator Stations as designed. Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy.

 

 

Senior E & I Commissioning Technician

FPSO Armada Olombendo , Eni Angola 15/06 East Hub Development Project BumiArmada – Was assigned in commissioning in team to carry out cold loop checking, commissioning and start-up. Perform field work for hot loop checking, troubleshooting and calibration of various instrument using the latest and standard test equipment. Simulate loops, logic testing as per system drawings. Was assigned as DCS Boardman / operator to verify, monitor and check all output results on temperature, pressure, level , flow transmitter reading from where comparison took place by tallying them from field to DCS / CCR . Perform cause & effect, sequence testing of PSD & ESD (emergency shutdown) which includes all E&I wiring interlocks. Pre-com / commissioning of actuated control valves, on/off valves, shutdown valves , BDV, MOV’s and switches etc. Liaise with package vendors to ensure all serial communication configurations, points, addresses, alarms, and ranges captured back in PCS Operator Stations as designed. Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy.

 

 

Senior Instrument Technician / Startup

Norwegian Petroleum Consultant Pte – Senior Instrument Technician / Startup  – Assigned in commissioning in team to carry out cold loop checking, commissioning and start-up. Perform hot loop checking, troubleshooting and calibration of various instrument using the latest and standard test equipment. Simulate loops, logic testing as per system drawings. Also assigned as DCS / ICSS boardman / operator to verify, monitor and check all output results on temperature, pressure, level , flow transmitter reading from where comparison took place by tallying them from field to DCS / CCR . Perform cause & effect, sequence testing of PSD & ESD (emergency shutdown) which includes all E&I wiring interlocks. Pre-com / commissioning of actuated control valves, on/off valves, shutdown valves , BDV, MOV’s and switches etc. Liaise with package vendors to ensure all serial communication configurations, points, addresses, alarms, and ranges captured back in PCS Operator Stations as designed. Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy.

 

 

Reviews

There are no reviews yet.

Be the first to review “Senior Instrument Commissioning Technician”

Your email address will not be published. Required fields are marked *

Electrical & Instrumentation Supervisor

EW TEAM Services – Electrical & Instrumentation Supervisor –

FPSO TURRITELLA Project , SHELL
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO CIDADE DE ILHABELA Project , PETROBRAS
c/o SBM Offshore , Maua Shipyard R.J. Brazil.

 

FPSO OSX 2 Project
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO CIDADE DE PARATY Project , PETROBRAS
c/o SBM Offshore , BrasFELS Shipyard , Angra- Brazil

 

FPSO CIDADE DE ANCHIETA Project , PETROBRAS
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO CIDADE DE PARATY Project , PETROBRAS
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO OKHA Project , WOODSIDE ENERGY LTD
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO P-57 JUBARTE , PETROBRAS
c/o SBM Offshore , BrasFELS Brazil

 

FPSO CAPIXABA RELOCATION Project , PETROBRAS
c/o SBM Offshore , Offshore – Brazil

 

FPSO P-57 , PETROBRAS
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO ESPIRITO SANTO , TAMBA BV – BC 10 , SHELL
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO MONDO Project , ESSO EXPLORATION ANGOLA
c/o SBM Offshore , Keppel Shipyard Singapore

 

Was assigned and involved in various construction and pre-commissioning / start-up activities. Conduct inspection, monitor daily activities and verify all installations are in compliance with the latest project drawings , engineering standard and specifications. Supervise and perform cable pulling, cable glanding and termination for all lighting DB’s , 440vac DB’s , LCS , MCC’s etc. Perform loop check ,continuity test , megger test, lighting efficiency testing with lux meter and torque test on normal / emergency lightings and small power , medium voltage motors and heat tracing etc. Provide technical support and conduct Hi Pot test , insulation resistance test and duct test for bus bars , HV cables , LV/HV motors and LV/HV transformers . Carried out works for over current relay , reverse power test , under & over voltage trip, under & over voltage trip etc. main switch board generator / motor ACB protective test . Safely perform thorough commissioning , testing on wiring connections, functional test, troubleshooting on all electrical equipments under PTW’s and LOTO on LV / MV DB’s system, LV switchgear & MCC’s , MV switchgears & MCC’s , UPS , VFD , motors, Generators, Transformers etc. Complete test inspection, sign off and submit ITR’s. Also attend toolbox talk and follow shipyard safety rules .

Assigned in FGS / ICSS commissioning team to carry out cold loop checking, testing and commissioning . Perform hot loop checking and calibration using the latest and standard test equipments of various FGS devices such as Smoke / Heat , Gas, Flame detectors, Line of sight , BDV, MOV’s , switches etc. Conduct troubleshooting on non-working loops due to construction deficiency, mis calibrated instruments, serial communication fault and/or flaw in the implementation program . Worked as ICSS boardman / operator , Conduct Logic Testing and Cause & Effect on Foam & Fire Water Deluge System, Fire & Gas Systems (addressable & non- addressable) including High Expansion Foam systems, CO2 System and HVAC System . Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy. To follow vessel for sailing to continue pending works prior to start-up and hand-over. To work offshore to continue outstanding work until first oil / first gas.

Was assigned in commissioning in team to carry out cold loop checking, commissioning and start-up. Perform hot loop checking, troubleshooting and calibration of various instrument using the latest and standard test equipments. Simulate loops, logic testing as per system drawings. Perform as DCS / ICSS boardman / operator to verify, monitor and check all output results on temperature, pressure, level , flow transmitter reading from where comparison took place by tallying them from field to DCS / CCR . Perform cause & effect, sequence testing of PSD & ESD (emergency shutdown) which includes all E&I wiring interlocks. Pre-com / commissioning of actuated control valves, on/off valves, shutdown valves , BDV, MOV’s and switches etc. Liaise with package vendors to ensure all serial communication configurations, points, addresses, alarms, and ranges captured back in PCS Operator Stations as designed. Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy. To follow vessel for sailing and continue outstanding and pending works prior to start-up and first oil.

Responsible for compiling site documentation for Hazardous Area Dossier , inspection , surveillance , rectification and checking of Electrical / Instrument installations are in accordance with contract specifications, approved drawings and test procedures to ensure project meets hazardous area certification requirements. Monitor Electrical installation in conformance with IEEE, IEC, NFPA, NEMA and other related international codes and standards. Inspect false work for conformance to design and last approved engineering drawings. Conduct detailed inspection in all instrument installation in all hazardous area prior to Ex register and compliance certificates according to area classification , gas group and temperature class. Raise and make minor or major punchlist for remedial work/action and rectify prior to commissioning handover . Maintained company standards of quality in accordance with the company quality system. Submit progress report. Complete, file and submit ITR’s .

 

 

Electrical & Instrumentation Engineer

PTT ENGINEERING AND CONSULTANT PTE – Electrical & Instrumentation Engineer

SAKHALIN 1 DEVELOPMENT , OPF CHAYVO RUSSIA
c/o ExxonMobil Neftegas Limited

 

FPSO CAPIXABA Project
c/o SBM Offshore , Keppel Shipyard Singapore

 

FPSO ERHA Project
c/o SAIPEM , Sembawang Shipyard Singapore

 

FPSO SENDJE BERGE Project
c/o Bergensen Offshore , Jurong Shipyard Singapore

FSO YOHO Project
c/o SBM Offshore , Malaysian Shipyard Engineering

 

DAN FIELD PLATFORM Project
c/o MAERSK OIL & GAS – S.M.O.E , Sembawang Shipyard Singapore

 

FPSO MARLIM SUL Project
c/o SBM Offshore , Keppel Shipyard Singapore

 

TEIJIN POLYCARBONATE CORPORATION
c/o Chiyoda Singapore

P- 43 BARRACUDA , HALLIBURTON Project
c/o KBR , Jurong Shipyard Singapore

 

FPSO SERPENTINA Project
c/o SBM Offshore , Keppel Shipyard Singapore

 

Pfizer Asia Pacific Pte Ltd ( OSP1 , Bulk Pharmaceutical Project )
Jacobs Lend Lease – Lot A 19924 Tuas South Ave7 , Singapore 630000

Multi Product Plant Offsites & Utilities Project
c/o Schering Plough Singapore

FSO P- 38 Conversion Project
c/o PETROBRAS , Jurong Shipyard Singapore

 

MERCK SHARP & DOHME SINGAPORE ( MSD ) Project
21Tuas South Avenue 6, Singapore 637766

FPSO P- 37 Project
c/o PETROBRAS , Jurong Shipyard Singapore

 

FPSO KUITO II Project
c/o SBM Offshore , Sembawang Shipyard Singapore

 

Was assigned involved in various Instrumentation construction and pre-commissioning / start-up activities. Also responsible in field supervision and coordination works for Instrument support and stanchion fabrication, primary and secondary cable tray’s and supports ,cable pulling / dressing , LCP and JB’s installation , glanding and termination on instrument panels , ADM , air line tubing , BDV, MOV’s , switches etc . Conduct inspection & monitor daily activities and verify all installations are in compliance with the latest project drawings, engineering standard and specifications. Perform activities in accordance with project QA manual QC inspection plan. As required prepare daily QC records and final acceptance documentation.

Was assigned in various engineering , fabrication and installation activities. Conduct inspection, monitor daily activities and verify all installations are incompliance with the latest project drawings , engineering standard and specifications. Supervise and perform cable pulling, cable glanding and termination for all lighting DB’s , 440vac DB’s , LCS , MCC’s etc. Perform line check ,continuity test , megger test, lighting efficiency testing with lux meter and torque test on normal / emergency lightings and small power , medium voltage motors and heat tracing etc. Provide technical support and conduct Hi Pot test , insulation resistance test and duct test for bus bars , HV cables , LV/HV motors and LV/HV transformers . Carried out works for over current relay , reverse power test , under & over voltage trip, under & over voltage trip etc. main switch board generator / motor ACB protective test . Safely perform thorough commissioning , testing on wiring connections, functional test, troubleshooting on all electrical equipments under PTW’s and LOTO on LV / MV DB’s system, LV switchgear & MCC’s , MV switchgears & MCC’s , UPS , VFD , motors, Generators, Transformers etc. Complete test inspection, sign off and submit ITR’s. Also attend toolbox talk and follow shipyard safety rules .

Assigned in FGS / ICSS commissioning team to carry out cold loop checking, testing and commissioning . Perform hot loop checking and calibration using the latest and standard test equipments of various FGS devices such as Smoke / Heat , Gas, Flame detectors, Line of sight , BDV, MOV’s , switches etc. Conduct troubleshooting on non-working loops due to construction deficiency, mis calibrated instruments, serial communication fault and/or flaw in the implementation program . Worked as ICSS boardman / operator , Conduct Logic Testing and Cause & Effect on Foam & Fire Water Deluge System, Fire & Gas Systems (addressable & non- addressable) including High Expansion Foam systems, CO2 System and HVAC System . Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy. To follow vessel for sailing to continue pending works prior to start-up and hand-over. To work offshore to continue outstanding work until first oil / first gas.

Was assigned in commissioning in team to carry out cold loop checking, commissioning and start-up. Perform hot loop checking, troubleshooting and calibration of various instrument using the latest and standard test equipments. Simulate loops, logic testing as per system drawings. Perform as DCS / ICSS boardman to verify, monitor and check all output results on temperature, pressure, level , flow transmitter reading from where comparison took place by tallying them from field to DCS / CCR . Perform cause & effect, sequence testing of PSD & ESD (emergency shutdown) which includes all E&I wiring interlocks. Pre-com / commissioning of actuated control valves, on/off valves, shutdown valves , BDV, MOV’s and switches etc. Liaise with package vendors to ensure all serial communication configurations, points, addresses, alarms, and ranges captured back in PCS Operator Stations as designed. Complete all Inspection and Test Records (ITR) and ensure progress database are updated regularly and target schedules are followed. Carry out as-built and red line mark up on drawings that need to be updated and has design discrepancies as per clients design requirements indicated on the master copy. To follow vessel for sailing and continue outstanding and pending works prior to start-up and first oil.