Senior Mechanical Commissioning Technician

    • 10+ Years Oil & Gas Experience
    • Mechanical Engineering
    • BOSIET – Basic Offshore Safety Induction Emergency Training
    • English, Spanish Speaking
Product Enquiry

Extended Profile

10+ Years Experience a Senior Mechanical Commissioning Technician, experienced with, Commissioning test work sheets including pre-mechanical energisation, initial energisation, item operations & full system cycle demo testing. Understanding P&ID’s, isometrics and general arrangement drawings. Isolating process plant and equipment. Motor/Pump Alignments using Rotalign Pro. Inspecting static and rotating equipment including pipework, tanks, vessels, heat exchangers, HVAC units, motors, pumps, turbines and compressors including alignments, punch lists and spare requirements. Compiling permits, writing risk assessments and carrying out Dynamic Risk Reviews and Tool Box Talk’s. Mechanically Isolating Systems and Plant Equipment. Fault finding. Hydrostatic and Nitrogen Leak Testing. Breakdowns and shutdown operations. Carrying out repairs on plant and associated equipment involving component replacements e.g. seals, bearings, pulleys, belts. Valve overhauls e.g. packing, seat lapping, skimming plug on a lathe. Plant proof tests. Service line inspections. Working with hydrocarbons, steam, water, acids and compressed air under low and high pressures.

 

 

Day Rate $500.00 USD

The Average Day Rate for this Senior Mechanical Commissioning Technician is $500.00 USD per Day. A Standard Contract Working Day is classed as 10 Hours with 1 unpaid Hour for Lunch. Additional allowance is Payable depending on location, which covers, Accommodation, Transport to and from the work site and Daily Allowance for Food, Beverage and Laundry. To estimate your daily team costs select the add this expert to your team. On Completion go to My Completion Team and Complete the Short Enquiry Form and we will do the rest…

Lead Mechanical Commissioning Technician

Lead Mechanical Commissioning Technician & Isolating Authority – Working on the BP Clair Ridge Project offshore commissioning the 1st Phase Utilities Platform and 2nd Phase Production Platform supervising a small team of technicians. Duties consist of commissioning the following systems; fresh water, fire water, nitrogen, HVAC, diesel, instrument air, gas power generation and production systems. Progressed to working as isolating authority responsible for creating and implementing process isolations under SIRPs standards. Tasks included following commissioning procedures to deliver the project scope, isolating process equipment and supervision of work parties, liaising with engineers to plan and implement tasks to correct standards, creating work permits and risk assessments, carrying out toolbox talks, leak testing, system flushing, filling systems, equipment start-ups and making systems live, MC1 and SH1 walk downs, pump/motor load runs, pump alignments, plant equipment preservation, completing ITR’s to Guidance on Certification (GOC) standards.

Mechanical Technician

Mechanical Technician – Working on a shut down on Fellside CHP Plant at Sellafield, Cumbria. Responsible for creating work orders and planned breakdowns and maintenance, writing risk assessments and method statements, working with computer based programs such as Maximo and Eclipse, supervising contractors and delivering toolbox talks and organising scaffolding, rigging and resources for work tasks. Sourcing materials and liaising with suppliers for replacement equipment, valve overhauls, alignment checks, maintenance tasks and breakdowns. The Plant includes three gas turbines and a steam turbine providing HP and LP steam and electricity to Sellafield Site.

 

 

Mechanical Commissioning Technicians

Mechanical Commissioning Technician – Offshore on the Claymore CCU Project on the Talisman Claymore Platform, working to GOC standards commissioning a new module containing a new Solar Turbine and Man Turbo Compressor. Also commissioning systems including compressed air, nitrogen package, HPU, cooling medium and lube oil. Carrying out tasks including line walking, marking up PIDs, Dry Gas Seal change out on the compressor and full build up, using hydraulic equipment, preservation maintenance, motor no load and load runs, filling up systems, start-ups and making systems live, pump-motor alignments using Rotalign Pro, working to commissioning procedures and remedial work on the solar turbine.

Mechanical Commissioning Technician

Mechanical Commissioning Technician – Working on the BP AAD project on the BP Andrew Platform offshore, working to GOC standards to take the project from pre-MC1 to SH1 & onto Plant Start Up. Responsible for creating and taking out work permits, giving toolbox talks to the work party and carrying out commissioning activities such as preservation, non-load and load runs on various pumps and motors, nitrogen and water leak testing, oil system flushing and sampling down to the correct NAS, motor alignments using Rotalign PRO, PID mark ups and Mechanical Completion Walk downs. Packages included; Instrument & Plant Air, HVAC, HPU, Open & Closed Drains, Flares & Vents, Methanol, Chemical Injection, Oil & Gas Export Metering, HP Gas Cooler Glycol Regeneration, Produced Water, Gas Turbines, Subsea Equipment, Production Risers & Utilities.

 

 

Reviews

There are no reviews yet.

Be the first to review “Senior Mechanical Commissioning Technician”

Your email address will not be published. Required fields are marked *

Mechanical Fitter / Technician

Mechanical Fitter/Technician – Working in B215 Highly Active Liquor Evaporation & Storage. Working with steam, cooling water, nitric acid and compressed air systems carrying out valve overhauls/replacements, pipe work installations, shutdown and routine maintenance operations, machining replacement parts for plant equipment, proof testing and condition monitoring.

Sellafield Ltd – Apprentice Fitter/Technician; Final stages of apprenticeship served at B215 Highly Active Liquor Evaporation & Storage. Gen II Initial stages of apprenticeship spent at Gen II Training Centre. The first four months were spent gaining experience carrying out bench fitting skills. This consisted of hack sawing and filing metal work to given tolerances. Next four months were spent gaining experience carrying out maintenance skills. This consisted of working on pumps, motors and gearboxes, learning the functions and operations of all plant and associated equipment, fault finding and working out solutions. Competency testing was then carried out to demonstrate my ability and learning skills. Further four months were spent gaining engineering and production skills. This consisted of operating milling machines and lathes completing tasks to fine tolerances. I gained experience reading engineering drawings and cross referencing these to my machining tasks so the tasks could be carried out to a highly skilled and professional level whilst adhering to specific tolerances.